Pulley replacement only for presses operating at 60Hz frequency
Proprietary and Confidential
MKT-0102-AI Rev 00
Page 7 of 10
align_pulleys_2
Figure 7 Touching the motor pulley
c.
Rotate the motor on its base until the straight-edge makes full contact
across the back surface of the motor pulley (from one side to the
other). See Figure 8 and Figure 9.
alig n _pu lle ys_3
Figure 8 Rotation of the motor
align_pulleys_4
Figure 9 Final alignment of both pulleys
FLAT AGAINST
BACK SURFACE
ROTATE THE
MOTOR ON
ITS BASE
PUMP
MOTOR
SLIDE MOTOR
UNTIL CORRECT
BELT TENSION IS
ACHIEVED.
FLAT AGAINST BACK
SURFACE OF BOTH
PULLEYS
MOTOR
PUMP
PULLEY NOT IN
CONTACT WITH
STRAIGHT EDGE
HERE.
STRAIGHT EDGE
TOUCHES MOTOR
PULLEY HERE
MOTOR
STRAIGHT EDGE
BELT
