HPE 1820 Switch Series Quick Start
Guide
The switch drawings in this document are for illustration only and may not match your particular switch
model.
For more detailed instructions and information to set up your switch, view or download the
Installation
and Getting Started Guide
for your switch at http://www.hpe.com/support/hpesc.
1. Unpack and check included parts.
•
Documentation kit
•
Switch
•
Accessory kit (installation hardware)
•
AC power cord for HPE 1820-24G, 1820-24G-POE+,
1820-48G and 1820-48G-POE switch models or DC external
power adapter for 1820-8G and 1820-8G-POE+ switch
models
2. Prepare for installation. To avoid personal injury or product damage, review the “Safety Precautions” (page 5)
3. Power on and verify that Self-Test completes normally.
For the 1820-24G, 1820-24G-POE+, 1820-48G, and
1820-48G-POE+ switches, connect the power cord to the power connector at the back of the switch, and then into an
electrical outlet.
For the 1820-8G and 1820-8G-POE+ switches, connect the AC/DC adapter power cord to the power connector at the back
of the switch, and then plug the AC/DC power adapter into an electrical outlet.
*5900-4819*
©
Copyright 2014, 2016 Hewlett Packard Enterprise Development LP
The information in this document is subject to change without notice.
Part Number: 5900-4819
Published: January 2016
