HP HP-UX 11i Administrator'S Manual Download

Page: 40 / 184

Table 5 Volume Group Management Commands

(continued)

Command

Task

vgversion

Migrating a volume group to a different volume group version

vgmove

Migrating a volume group to new disks

To convert the cDSFs of a volume group in a particular node back to their corresponding persistent DSFs, use
the

vgscan -f

command. For example:

# vgscan -f vgtest
*** LVMTAB has been updated successfully.

Repeat the above command on all the nodes in the cluster where this shared volume group is present (i.e.,
imported). Use the

lvmadm -l

command to verify the conversion of cDSFs to persistent DSF.

Table 6 Logical Volume Management Commands

Command

Task

lvcreate

Creating a logical volume

lvchange

Modifying a logical volume

lvdisplay

Displaying information about logical volumes

lvextend

Increasing the size of a logical volume by allocating disk space

lvmove

Migrating a logical volume to new disks

lvreduce

Decreasing the size of a logical volume

lvremove

Removing the allocation of disk space for one or more logical volumes within a volume
group

lvlnboot

Preparing a logical volume to be a root, primary swap, or dump volume; updating the
boot information on the boot physical volume

lvrmboot

Removing the link that makes a logical volume a root, primary swap, or dump volume

lvsplit

Splitting a mirrored logical volume into two logical volumes

lvmerge

Merging two logical volumes into one mirrored logical volume

lvsync

Synchronizing mirror copies in a mirrored logical volume

The

lvlnboot

and

lvrmboot

commands are not supported on Version 2.0 and 2.1 volume groups.

The command-line interface is more powerful—and thus more dangerous—than HP SMH and
offers options that are not available using HP SMH. For example, the following tasks cannot
currently be done by HP SMH. For these tasks, use the HP-UX commands:

◦

“Creating a Spare Disk” (page 76)

◦

“Reinstating a Spare Disk” (page 77)

◦

“Synchronizing a Mirrored Logical Volume” (page 26)

◦

“Moving Data to a Different Physical Volume” (page 73)

◦

“Disk Troubleshooting and Recovery Procedures” (page 116)

The remainder of this chapter explains how to do LVM tasks using HP-UX commands. However,
HP SMH is the tool of choice for most administration work.

Displaying LVM Information

To display information about volume groups, logical volumes, or physical volumes, use one of
three commands. Each command supports the

-v

option to display detailed output and the

-F

option to help with scripting.

Administering LVM

Summary of Contents for HP-UX 11i

























































































































































































Search results

Summary of Contents for HP-UX 11i

Reviews:

Related manuals for HP-UX 11i

Brands by name

Popular brands

HP HP-UX 11i, Administrator'S Manual

Search results

Summary of Contents for HP-UX 11i

Reviews:

Related manuals for HP-UX 11i

Brands by name

Popular brands