Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-5
Solid-state drive descriptions and part numbers
Description
Spare part number
1 TB, PCIe, TLC
L85348-002
512 GB, PCIe, value
L85364-002
256 GB, PCIe, value
L85354-002
128 GB, PCIe, TLC
M06792-002
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 32
).
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
).
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
2.
Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
RTC battery
To remove the RTC battery, use this procedure and illustration.
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
Summary of Contents for HP ProBook 445 G8
Page 4: ...iv Safety warning notice ...
