Several options allow for quick and easy expansion of the HP Rack 10000 G2 Series racks to create a custom solution.
NOTE:
This is only a sampling of the many HP Rack options available. See the HP rack products Web site for more complete
information at
http://www.hp.com/products/rackoptions
. Contact your nearest HP Authorized Reseller or Service Provider for
information about ordering HP parts. In the United States, HP can make arrangements to have your rack system installed by qualified
Guaranteed Service Providers. This installation service covers the entire hardware installation sequence, from unpacking the
components to routing cabling and running a test of the system.
HP Airflow Optimization
HP 10000 Series Rack Airflow Optimization Kit
AF090A
NOTE:
The Airflow Optimization kit is designed to prevent hot and cold air from mixing
thus optimizing the temperature at which the chilled air enters the racked servers.
NOTE:
When configuring racks through Factory Express, a Rack Optimization kit will
automatically ship with the rack. This kit is recommended for all other rack
configurations also.
HP Rack Light Kit
HP Light Kit for 10000 Series Rack
NOTE:
Supports HP Rack 10000 Series and HP Rack 10000 G2 series. This light kit is
mounted on the rack roof and used to provide light to the rear section of the rack.
361589-B21
HP Rack Securing Kit
HP 600W 10K G2 Rack Tie Down Kit
NOTE:
For HP 10000 600mm wide G2 Series only. The tie down kit is used to secure the
rack to the datacenter floor for seismic anchoring.
AF076A
HP 1200mm Configure-to-order Rack Tie Down Kit
NOTE:
For AF092A and AF094A only. The tie down kit is used to secure the rack to the
datacenter floor for seismic anchoring. All other 10000 600mm wide G2 Series racks
use the AF076A
AF075A
Rack Coupling Kit
10000 Rack Coupling Kit
248929-B21
NOTE:
Supported by both the Rack 10000 and Rack 10000 G2 series. Supports 24 in and
600 mm floor tile spacing. The kit is used to join two or more 10000 series racks of the
same height together in minutes to create a multi-bay configuration.
Offset Baying Kit
HP 9000 to 10000 Rack Offset Baying Kit
248931-B21
NOTE:
This kit can be used to connect 9000 and 10000 series racks of the same U height
together. Kit contents include hardware for connecting racks and a panel to cover the
100mm gap at the rear of the two racks.
QuickSpecs
HP Rack 10000 G2 Series
Related Options
DA - 12402 North America — Version 40 — June 25, 2013
Page 6
