HP FlexNetwork NJ5000, User Manual

Page: 75 / 475

63
Item Description
Confirm Password Enter the same password again.
Password
Encryption
Select the password encryption type:
•
Reversible
—Uses a reversible encryption algorithm. The ciphertext password
can be decrypted to get the plaintext password.
•
Irreversible
—Uses an irreversible encryption algorithm. The ciphertext
password cannot be decrypted to get the plaintext password.
Service Type
Select the service types for the user to use, including Web, FTP, and Telnet. You must
select at least one service type.
Setting the super password
A management level user can set the password for non-management level users to switch to the
management level. If the password is not set, non-management level users cannot switch to the
management level from a lower level.
To set the super password:
1.
Select
Device
>
Users
from the navigation tree.
2.
Click the
Super Password
tab.
Figure 56 Setting the super password
3.
Configure a super password as described in Table 25 .
4.
Click
Apply
.
Table 25 Configuration items
Item Description
Create/Remove
Select the operation type:
•
Create
—Configure or change the super password.
•
Remove
—Remove the current super password.
Password Set the password for non-management level users to switch to the management level.
Confirm Password Enter the same password again.
Password
Encryption
Select the password encryption type:
•
Reversible
—Uses a reversible encryption algorithm. The ciphertext password
can be decrypted to get the plaintext password.
•
Irreversible
—Uses an irreversible encryption algorithm. The ciphertext