HP FlexNetwork NJ5000, User Manual, Page: 74 / 475

62
Managing users
The user management function allows you to do the following:
•
Adding a local user, and specifying the password, access level, and service types for the user.
•
Setting the super password for non-management level users to switch to the management
level.
•
Switching to the management level from a lower level.
Adding a local user
1.
Select
Device
>
Users
from the navigation tree.
2.
Click the
Create
tab.
Figure 55 Adding a local user
3.
Configure a local user as described in Table 24 .
4.
Click
Apply
.
Table 24 Configuration items
Item Description
Username Enter a username for the user.
Access Level
Select an access level for the user.
Users of different levels can perform different operations. User levels, in order from low
to high, are as follows:
•
Visitor
—A visitor level user can perform only ping and traceroute operations.
They cannot access the data on the device or configure the device.
•
Monitor
—A monitor level user can perform ping and traceroute operations and
access the data on the device, but they cannot configure the device.
•
Configure
—A configure level user can perform ping and traceroute operations,
access data on the device, and configure the device, but they cannot upgrade the
software, add/delete/modify users, or back up or restore the configuration file.
•
Management
—A management level user can perform any operations on the
device.
Password Set the password for the user.