145
Item Description
Port
Set the port to which the MAC address belongs. This port must belong to the
specified VLAN.
Setting the aging time of MAC address entries
1.
Select
Network
>
MAC
from the navigation tree.
2.
Click the
Setup
tab to enter the page for setting the MAC address entry aging time.
Figure 155 Setting the aging time for MAC address entries
3.
Configure the aging time for MAC address entries as described in
4.
Click
Apply
.
Table 59 Configuration items
Item Description
No-aging
Specify that the MAC address entry never ages out.
Aging time
Set the aging time for the MAC address entry.
MAC address table configuration example
Network requirements
Use the Web-based NMS to configure the MAC address table of the device. Add a static MAC
address 00e0-fc35-dc71 under GigabitEthernet 1/0/1 in VLAN 1.
Creating a static MAC address entry
1.
Select
Network
>
MAC
from the navigation tree.
By default, the
MAC
tab is displayed.
2.
Click
Add
.
3.
Configure a MAC address entry:
a.
Type MAC address
00e0-fc35-dc71
.
b.
Select
static
from the
Type
list.
c.
Select
1
from the
VLAN
list.
d.
Select
GigabitEthernet1/0/1
from the
Port
list.
4.
Click
Apply
.
Summary of Contents for FlexNetwork NJ5000
