HP FlexNetwork NJ5000, User Manual

Page: 105 / 475

93
3.
Click
Add
.
The
Add SNMP Group
page appears.
Figure 92 Creating an SNMP group
4.
Configure SNMP group as described in Table 42 .
5.
Click
Apply
.
Table 42 Configuration items
Item Description
Group Name Set the SNMP group name.
Security Level
Select the security level for the SNMP group:
•
NoAuth/NoPriv
—No authentication no privacy.
•
Auth/NoPriv
—Authentication without privacy.
•
Auth/Priv
—Authentication and privacy.
IMPORTANT:
For an existing SNMP group, its security level cannot be modified.
Read View Select the read view of the SNMP group.
Write View
Select the write view of the SNMP group.
If no write view is configured, the NMS cannot perform the write operations to all
MIB objects on the device.
Notify View
Select the notify view (the view that can send trap messages) of the SNMP group.
If no notify view is configured, the agent does not send traps to the NMS.
ACL
Associate a basic ACL with the group to restrict the source IP address of SNMP
packets. To restrict the intercommunication between the NMS and the agent, you
can allow or prohibit SNMP packets with a specific source IP address.
Configuring an SNMP user
1.
Select
Device
>
SNMP
from the navigation tree.
2.
Click the
User
tab.
The
User
tab appears.