363
Usage guidelines
This command is effective only on non-FTP login users. An FTP user cannot continue to log in after
its password expires.
Examples
# Allow a user to log in five times within 60 days after the password expires.
<Sysname> system-view
[Sysname] password-control expired-user-login delay 60 times 5
Related commands
display password-control
password-control history
Use
password-control history
to set the maximum number of history password records for each
user.
Use
undo password-control history
to restore the default.
Syntax
password-control history max-record-number
undo password-control history
Default
The maximum number of history password records for each user is 4.
Views
System view
Predefined user roles
network-admin
Parameters
max-record-number
: Specifies the maximum number of history password records for each user. The
value range is 2 to 15.
Usage guidelines
When the number of history password records reaches the maximum number, the subsequent
history record overwrites the earliest one.
The system stops recording passwords after you execute the
undo password-control history
enable
command, but it does not delete the prior records.
To delete the existing records, use one of the following methods:
•
Use the
undo password-control enable
command to disable the password control feature
globally.
•
Use the
reset password-control history-record
command to clear the passwords manually.
Examples
# Set the maximum number of history password records for each user to 10.
<Sysname> system-view
[Sysname] password-control history 10
Related commands
display password-control
Summary of Contents for FlexNetwork MSR Series
Page 1005: ...987 ...
