25
interface-number
: Specifies an interface number. If you do not specify this argument, the command
clears dropped packet statistics on all interfaces of the specified type.
Examples
# Clear dropped packet statistics on GigabitEthernet 1/0/1.
<Sysname> reset packet-drop interface gigabitethernet 1/0/1
# Clear dropped packet statistics on all interfaces.
<Sysname> reset packet-drop interface
Related commands
display packet-drop
shutdown
Use
shutdown
to shut down an Ethernet interface.
Use
undo
shutdown
to bring up an Ethernet interface.
Syntax
shutdown
undo shutdown
Default
Ethernet interfaces are in up state.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
You might need to shut down and then bring up an Ethernet interface to make some interface
configurations take effect.
Examples
# Shut down and then bring up GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] shutdown
[Sysname-GigabitEthernet1/0/1] undo shutdown
speed
Use
speed
to set the speed of an Ethernet interface.
Use
undo speed
to restore the default.
Syntax
speed
{
10
|
100
|
1000
|
10000
|
auto
}
undo speed
Default
An Ethernet interface negotiates a speed with its peer.
Summary of Contents for FlexNetwork 5130 HI series
Page 302: ...294 ...
