HP FlexFabric 5700 series Security Configuration Manual Download Page 99

Page: 99 / 460

{

Enable MAC-based VLAN on the port. For more information about the MAC-based VLAN

feature, see

Layer 2—LAN Switching Configuration Guide

{

Assign the port to the 802.1X guest VLAN as an untagged member.

Configuration procedure

To configure an 802.1X guest VLAN:

Step Command

Remarks

Enter system view.

system-view

N/A

Enter Ethernet interface view.

interface

interface-type

interface-number

N/A

Configure the 802.1X guest
VLAN on the port.

dot1x guest-vlan

guest-vlan-id

By default, no 802.1X guest VLAN
is configured on any port.

Configuring an 802.1X Auth-Fail VLAN

Configuration guidelines

When you configure an 802.1X Auth-Fail VLAN, follow these restrictions and guidelines:

•

Assign different IDs to the voice VLAN, the port VLAN, and the 802.1X Auth-Fail VLAN on a port.

The assignment ensures that the port can correctly process VLAN-tagged incoming traffic.

•

You can configure only one 802.1X Auth-Fail VLAN on a port. The 802.1X Auth-Fail VLANs on
different ports can be different.

•

When you configure multiple security features on a port, follow the guidelines in

Table 8

Relationships of the 802.1X Auth-Fail VLAN with other features

Feature Relationship description

Reference

MAC authentication guest VLAN
on a port that performs

MAC-based access control

The 802.1X Auth-Fail VLAN has
a high priority.

See "

Configuring MAC

authentication

Port intrusion protection actions
on a port that performs
MAC-based access control

The 802.1X Auth-Fail VLAN
feature has higher priority than
the block MAC action.
The 802.1X Auth-Fail VLAN
feature has lower priority than

the shutdown port action of the
port intrusion protection feature.

See "

Configuring port security

Configuration prerequisites

Before you configure an 802.1X Auth-Fail VLAN, complete the following tasks:

•

Create the VLAN to be specified as the 802.1X Auth-Fail VLAN.

Summary of Contents for FlexFabric 5700 series













































































































































































































































































































































































































































































Search results

Summary of Contents for FlexFabric 5700 series

Reviews:

Related manuals for FlexFabric 5700 series

Brands by name

Popular brands

HP FlexFabric 5700 series, Security Configuration Manual

Search results

Summary of Contents for FlexFabric 5700 series

Reviews:

Related manuals for FlexFabric 5700 series

Brands by name

Popular brands