319
[Switch-luser-manage-client001] service-type ssh
# Assign the user role
network-admin
to the user.
[Switch-luser-manage-client001] authorization-attribute user-role network-admin
[Switch-luser-manage-client001] quit
# Create an SSH user
client001
. Specify the service type as
stelnet
and the authentication method
as
password
for the user.
[Switch] ssh user client001 service-type stelnet authentication-type password
2.
Establish a connection to the Stelnet server:
There are different types of Stelnet client software, such as PuTTY and OpenSSH. This example
uses an Stelnet client that runs PuTTY version 0.58.
To establish a connection to the Stelnet server:
a.
Launch PuTTY.exe to enter the interface shown in
.
b.
In the
Host Name (or IP address)
field, enter the IP address
192.168.1.40
of the Stelnet server.
Figure 88
Specifying the host name (or IP address)
c.
Click
Open
to connect to the server.
If the connection is successfully established, the system notifies you to enter the username and
password. After entering the username (
client001
in this example) and password (
aabbcc
in this
example), you can enter the CLI of the server.
