41
3.5.2
Using car’s battery with ACC cable connected.
Motion Detection:
-
In normal loop recording mode, press and hold POWER for 3
seconds, The screen will show message “
Press OK to power off
or enter Motion Detection after 10 sec.
”
-
To disable this function, press any key to wake up the screen,
and resume to normal loop recording; or when the car engine is
started again, manually power off and power on the car
camcorder, it will be back to normal loop recording.
Vibration Detection:
-
Not available for this function
3.5.3
Connect with power bank
Motion Detection:
-
In normal loop recording mode, unplug car adapter and connect
power bank, press and hold POWER key for 3 seconds, The
screen will show message “
Press OK to power off or enter
Motion Detection after 10 sec
.”
-
To disable this function, press any key to wake up the screen,
and resume to normal loop recording; or when the car engine is
started again, unplug the power bank, and connect car adapter, it
will be back to normal loop recording.
Vibration Detection:
-
Not available for this function
