12
3.1.2
Motion Detection
If
Motion Detection
is activated, when the camcorder is powered on, a
message “
Wait for 10 seconds to enter Motion Detection or touch the
screen to power off
” will be displayed on the screen. This means the
system will enter Motion Detection automatically in 10 seconds; when
the camcorder detects any motion in front of lens, Video Record will be
activated for a duration the same as the length setting.
To set the motion detection, do the following:
1.
Touch
to enter main
menu.
2.
Touch
to switch over
to
Driving Safety
Main Menu.
3.
Touch
/
to select
for entering
Motion
Detection
menu, touch
again to activate (
on
).
4.
Touch
to return to record screen.
Note:
1. When the battery is fully charged and is in good condition, Motion Detection can
record continuously for about 30 minutes.
2. As the camcorder is used, the battery storage capacity will decrease gradually. This
is a normal phenomenon for the battery.
