25
3. The detections of
FCMD
may be inaccurate when used in rain, at night or in environments of
insufficient lighting. Drivers are advised to exercise discretion based on actual road conditions.
4. The product will recalibrate 30 seconds later after the initial alert if the
FCMD
function has been
activated. If the vehicle remains in a stationary mode and the product detects image changes in
the front lens, the product will once again trigger the voice and screen message alerts.
5. Feature is only applicable under the following resolutions: 1080P/60fps, 1080P/30fps.
3.1.12
Parking Mode
To monitor the vehicle when it is parked, you can activate
Motion
Detection
or
Vibration Detection
.
1.
If recording is in progress, press the
button to stop recording.
2.
Press the
button to enter the OSD menu.
3.
Press the
/
button, select
Parking Mode
, and then press the
button.
4.
Press the
/
button, select
Vibration Detection
or
Motion
Detection
, and then press the
button.
5.
Press the
button to exit the menu.
Item
Description
Vibration
Detection
If disconnected from power when the camcorder
is powered on, the system alert message
“Wait
for 60 seconds to enter Vibration Detection or
press
key to power off.”
This means the
system will enter Vibration Detection
automatically in 60 seconds; when the camcorder
detects any external vibration applied to the
vehicle, Video Record will be 60 seconds and the
recording will be protected. If press
within
60 seconds, the camcorder will be powered off
instead of entering Vibration Detection mode.
Motion
Detection
If disconnected from power when the camcorder
is powered on, the system alert message
“Wait
for 10 seconds to enter Motion Detection, or
press
key to power off.”
This means the
system will be displayed on the screen. This
means the system will enter Motion Detection
