8
2.4
Auto Power On/Off
Once the vehicle engine is started, the camcorder automatically turns on.
If the
Automatic Record
function is enabled, the recording will
automatically start right after the camcorder turns on.
2.5
Initial Settings
Before using the camcorder, we recommend you to enable the
Automatic Record
function and set up the correct date and time.
2.5.1
Setting the Universal Time Code (UTC)
Depending on your location, you may need to change the current UTC
setting of the camcorder so that the correct date and time are updated
when a GPS signal is detected.
* Be sure to adjust for daylight saving time (DST) by 1 hour to the UTC
offset
** These areas may observe half hour increments and daylight saving time (DST)
