HP Enterprise HPE Edgeline EL8000t User Manual Download Page 45 | Manualshive

Page: 45 / 112

background image

• Using the

Update Firmware controls to install firmware on the local managed server.

• Viewing

installed software.

• Managing

maintenance windows. You can apply maintenance windows to tasks that you add to the installation

queue.

• Accessing the iLO with integrated Smart Update features. This version of iLO supports the following actions:

◦

View and manage the components in the

iLO Repository.

◦

Add components from the iLO Repository to the installation queue.

◦

View and manage tasks in the

installation queue.

The best practice is to use SUM to manage the installation queue. For more information, see the SUM
documentation.

You can access the

Update Firmware, Upload to iLO Repository, and Add to Queue controls from all tabs on the

Firmware & OS Software page.

For more information, see the

Firmware Updates video.

Special considerations for network module updates

The EL8000t chassis hosts two network modules. The module on the left is the default, and provides both networking and
management for the chassis. Any firmware updates to the network modules performed from iLO, or from a Smart
Component update performed from an installed operating system, are automatically applied to the default network
module only. No firmware updates can be applied to the right-side module. The right-side module only provides 1G
internal port connections and iLO connectivity to the e910t server blades in the chassis and will not require firmware
updates.

Viewing installed firmware information

Procedure

1. Click Firmware & OS Software in the navigation tree.

The

Installed Firmware page displays firmware information for various server components. If the server is powered

off, the information on this page is current as of the last power off. Firmware information is updated only when the
server is powered on and POST is complete.

2. (Optional) To sort by a table column, click the column heading.

To change the sort order to ascending or descending, click the column heading again or click the arrow icon next to
the column heading.

Firmware types

The firmware types listed on the

Installed Firmware page vary based on the server model and configuration.

For most servers, the system ROM and iLO firmware are listed. Other possible firmware options include the following:

• Power Management Controller

• Server Platform Services Firmware

• Smart Array

• Intelligent Platform Abstraction Data

Using HPE iLO 5

45

«
...
43
44
45
46
47
...
»

Summary of Contents for Enterprise HPE Edgeline EL8000t

















































































































Reviews:

No comments

Related manuals for Enterprise HPE Edgeline EL8000t

ALTOS R910 Series

Brand: Acer Pages: 74

Brand: F5 Pages: 2

WANJet 400 Appliance

Brand: F5 Pages: 11

5big - Network NAS Server

Brand: LaCie Pages: 9

Brand: LaCie Pages: 14

D-811_002-NXS-SAG

Brand: NOMACHINE Pages: 19

Brand: US Robotics Pages: 156

UniServer BT716F

Brand: H3C Pages: 44

SUPERSERVER 6035B-8R+

Brand: Supero Pages: 110

Brand: D-Link Pages: 113

Brand: D-Link Pages: 100

Brand: Gigabyte Pages: 86

Brand: Gigabyte Pages: 110

Brand: Gigabyte Pages: 173

Brand: Gigabyte Pages: 166

Brand: Gigabyte Pages: 134

Brand: CasaTunes Pages: 7

Brand: F5 Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands