TouchPad
Description
Spare part number
TouchPad (includes cable)
850907-001
Before removing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 23
).
5.
Remove the battery (see
Battery on page 25
).
Remove the TouchPad:
1.
Disconnect the TouchPad cable (1) from the system board.
2.
Lift the cable from the adhesive that secures it to the battery (2).
3.
Remove the adhesive from atop the TouchPad (3).
4.
Remove the six Phillips PM2.0×2.0 broadhead screws (4) that secure the TouchPad to the computer, and
then remove the TouchPad from the computer (5).
Reverse the removal procedures to install the TouchPad.
Component replacement procedures
29
