Power connector
Description
Spare part number
Power connector
844424-001
Before removing the power connector, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 28
).
5.
Disconnect the battery (see
Battery on page 29
).
Remove the power connector:
1.
Disconnect the power connector cable from the system board (1).
2.
Remove the power connector cable from the clip built into the chassis (2).
3.
Remove the Phillips PM2.0×4.0 screw (3) that secures the power connector cable to the computer.
4.
Lift the power connector from the computer (4).
Reverse this procedure to install the power connector.
38
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
