background image

Modem module

NOTE:

The modem module spare part kit does not include a modem module cable. The modem

module cable is included in the cable kit, spare part number 690623-001. For information about cable

kit contents, see 

Cable Kit on page 33

.

Description

Spare part number

56k v.92 MDC data/fax modem module

628824-001

Before removing the modem module, follow these steps:

IMPORTANT:

Make special note of each screw and screw lock size and location during removal

and replacement.

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 54

).

5.

Remove the service door (see 

Service door on page 60

).

6.

Remove the following components:

a.

Hard drive (see 

Hard drive on page 72

).

b.

Upgrade bay device (see 

Upgrade bay device on page 77

).

c.

Keyboard (see 

Keyboard on page 81

).

d.

Top cover (see 

Top cover on page 87

).

e.

Audio/USB 3.0 board (see 

Audio/USB 3.0 board on page 106

).

Remove the modem module:

1.

Turn the computer right-side up, with the front toward you.

2.

Disconnect the modem module cable 

(1)

 from the system board.

3.

Remove the two Phillips barrel screws 

(2)

 that secure the modem module to the system board.

108

Chapter 4   Removal and replacement procedures

Summary of Contents for EliteBook 8570w






















































































































































































Reviews: