8.
Connect AC power and external devices to the computer.
9.
Turn on the computer.
To install the hard drive for the ProBook:
1.
Insert the hard drive into the hard drive bay at an angle
(1)
, and then lay the hard drive flat in the
hard drive bay
(2)
.
2.
Pull the plastic tab
(3)
toward the center of the computer to engage the hard drive with the
connector.
3.
Tighten the hard drive screws
(4)
.
4.
Replace the service door (see
Replacing the service door on page 34
).
5.
Insert the battery (see
Inserting or removing the battery on page 32
).
6.
Connect AC power and external devices to the computer.
7.
Turn on the computer.
Updating programs and drivers
HP recommends that you update your programs and drivers on a regular basis with the latest
versions. For U.S. support, go to
http://www.hp.com/go/contactHP
. For worldwide support, go to
http://welcome.hp.com/country/us/en/wwcontact_us.html
.
38
Chapter 5 Maintenance
