manualshive.com logo in svg

HP EliteBook 845 G7, Maintenance And Service Manual, Page: 61 / 108

Share
Download
HP EliteBook 845 G7 Maintenance And Service Manual Download Page 61

3.

Remove the fingerprint reader board from the computer (4).

Reverse this procedure to install the fingerprint reader board.

Touchpad

To remove the touchpad, use this procedure and illustration.

Table 6-8

  Touchpad description and part number

Description

Spare part number

Touchpad button board

M07106-001

Touchpad

M07108-001

Touchpad with NFC antenna

M07109-001

Touchpad cable (included in Cable Kit)

M07101-001

Before removing the touchpad, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 33

).

2.

Remove the bottom cover (

Bottom cover on page 33

).

3.

Remove the battery (see 

Battery on page 43

).

Remove the touchpad:

1.

Disconnect the system board cable from the ZIF connector on the touchpad (1).

2.

Disconnect the middle cable from the ZIF connector on the touchpad (2).

3.

Disconnect the touchpad button board cable from the ZIF connector on the touchpad (3).

4.

Disconnect the cable from the ZIF connector on the system board (4).

5.

Remove the four Phillips M1.6 × 1.8 screws (5) that secure the touchpad to the computer.

Component replacement procedures

51

Summary of Contents for EliteBook 845 G7













































































































Reviews:

No comments