HP EliteBook 820 G4 Maintenance And Service Manual Download Page 69

Page: 69 / 105

Touchpad board

Description

Spare part number

Touchpad board

821668-001

Touchpad board with NFC antenna

821667-001

Before removing the touchpad board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.

Remove the bottom cover (see

Bottom cover on page 30

Remove the battery (see

Battery on page 35

Remove the touchpad board:

Lift the tape (1) that secures the touchpad board to the computer.

Disconnect the cable from the smart card reader board (2).

Disconnect the NFC antenna from the NFC module (3).

Remove the 3 Phillips M2.0x2.0 screws (4) that secure the touchpad board to the computer.

Lift the bottom of the touchpad board up, and then pull it forward to remove it from the computer (5).

Reverse this procedure to install the touchpad board.

Component replacement procedures

Summary of Contents for EliteBook 820 G4










































































































Search results

Summary of Contents for EliteBook 820 G4

Reviews:

Related manuals for EliteBook 820 G4

Brands by name

Popular brands

HP EliteBook 820 G4, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 820 G4

Reviews:

Related manuals for EliteBook 820 G4

Brands by name

Popular brands