manualshive.com logo in svg

HP Elite Slice G2, Maintenance And Service Manual, Page: 28 / 115

Share
Download
HP Elite Slice G2 Maintenance And Service Manual Download Page 28

Lithium coin cell battery

The battery that comes with the computer provides power to the real-time clock and has a minimum lifetime 
of about three years.

See the appropriate removal and replacement chapter for the chassis you are working on in this guide for 
instructions on the replacement procedures.

WARNING!

This computer contains a lithium battery. There is a risk of fire and chemical burn if the battery is 

handled improperly. Do not disassemble, crush, puncture, short external contacts, dispose in water or fire, or 
expose it to temperatures higher than 140ºF (60ºC). Do not attempt to recharge the battery.

NOTE:

Batteries, battery packs, and accumulators should not be disposed of together with general 

household waste. In order to forward them for recycling or proper disposal, please use the public collection 
system or return them to HP.

20

Chapter 3   Routine care, SATA drive guidelines, and disassembly preparation

Summary of Contents for Elite Slice G2




















































































































Reviews:

No comments