HP Elite Dragonfly Maintenance And Service Manual Download

Page: 50 / 84

Remove the speakers from the computer (4).

Reverse this procedure to install the speakers.

USB board

To remove the USB board, use this procedure and illustration.

Table 5-11

USB board description and part number

Description

Spare part number

USB board (models without WWAN)

M42276-001

USB board (models with WWAN)

M42277-001

USB board cable (available in the Cable Kit for models without WWAN)

M42293-001

USB board cable (available in the Cable Kit for models with WWAN)

M48385-001

Before removing the USB board, follow these steps:

Prepare the computer for disassembly (

Preparation for disassembly on page 29

Remove the bottom cover (

Bottom cover on page 29

Disconnect the battery cable from the system board (see

Battery on page 30

Remove the heat sink and fan assembly (

Heat sink and fan assembly on page 36

Remove the power button board (

Power button board on page 43

Remove the USB board:

Disconnect the large, flat cable from the ZIF connector on the USB board (2).

Disconnect the touch cable from the connector on the USB board (2).

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Elite Dragonfly





















































































Search results

Summary of Contents for Elite Dragonfly

Reviews:

Related manuals for Elite Dragonfly

Brands by name

Popular brands

HP Elite Dragonfly, Maintenance And Service Manual

Search results

Summary of Contents for Elite Dragonfly

Reviews:

Related manuals for Elite Dragonfly

Brands by name

Popular brands