HP Elite Dragonfly Maintenance And Service Manual Download

Page: 44 / 84

Heat sink and fan assembly

To remove the heat sink and fan assembly, use these procedures and illustrations.

Table 5-5

Heat sink and fan assembly descriptions and part numbers

Description

Spare part number

Heat sink and fan assembly

M42267-001

Before removing the heat sink and fan assembly, follow these steps:

Prepare the computer for disassembly (

Preparation for disassembly on page 29

Remove the bottom cover (

Bottom cover on page 29

Disconnect the battery cable from the system board (see

Battery on page 30

Remove the heat sink and fan assembly:

Remove the four Phillips M2.0 × 3.0 screws (1) that secure the heat sink to the computer.

Remove the three Phillips M2.0 × 3.0 screws (2) that secure the fan to the computer.

Disconnect the fan cable from the system board (3).

Remove the fan and heat sink assembly from the computer (4).

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Elite Dragonfly





















































































Search results

Summary of Contents for Elite Dragonfly

Reviews:

Related manuals for Elite Dragonfly

Brands by name

Popular brands

HP Elite Dragonfly, Maintenance And Service Manual

Search results

Summary of Contents for Elite Dragonfly

Reviews:

Related manuals for Elite Dragonfly

Brands by name

Popular brands