HP E4510-48G, Command Reference Manual

Page: 964 / 1334

1-15
# Cancel the lock.
Password:
Again:
<Sysname>
parity
Syntax
parity { even | mark | none | odd | space }
undo parity
View
AUX interface view
Default Level
2: System level
Parameters
even : Performs even checks.
mark : Performs mark checks.
none : Does not check.
odd : Performs odd checks.
space : Performs space checks.
Description
Use the parity command to set the check mode of the user interface.
Use the undo parity command to revert to the default check mode.
No check is performed by default.
3COM switch 4510G support the even , none , and odd check modes only. To establish the
connection again, you need to modify the configuration of the termination emulation utility running on
your PC accordingly.
Examples
# Set to perform mark checks.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] parity mark