HP E4510-48G, Command Reference Manual

Page: 834 / 1334

14-15
Table 14-6 ICMP-specific parameters for advanced IPv4 ACL rules
Parameters Function Description
icmp-type { icmp-type
icmp-code |
icmp-message }
Specifies the ICMP message
type and code.
The icmp-type argument ranges from
0 to 255.
The icmp-code argument ranges
from 0 to 255.
The icmp-message argument
specifies a message name.
Supported ICMP message names
and their corresponding type and
code values are listed in
Table 14-7 .
Table 14-7 ICMP message names supported in advanced IPv4 ACL rules
ICMP message name Type Code
echo 8 0
echo-reply 0 0
fragmentneed-DFset 3 4
host-redirect 5 1
host-tos-redirect 5 3
host-unreachable 3 1
information-reply 16 0
information-request 15 0
net-redirect 5 0
net-tos-redirect 5 2
net-unreachable 3 0
parameter-problem 12 0
port-unreachable 3 3
protocol-unreachable 3 2
reassembly-timeout 11 1
source-quench 4 0
source-route-failed 3 5
timestamp-reply 14 0
timestamp-request 13 0
ttl-exceeded 11 0
Description
Use the rule command to create an advanced IPv4 ACL rule or modify an existing advanced IPv4 ACL
rule.
Use the undo rule command to remove an advanced IPv4 ACL rule or remove some criteria from the
rule.