HP E4510-48G, Command Reference Manual

Page: 622 / 1334

1-7
undo authentication default
View
ISP domain view
Default Level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name : Specifies an HWTACACS scheme by its name, which is
a string of 1 to 32 characters.
local : Performs local authentication.
none : Does not perform any authentication.
radius-scheme radius-scheme-name : Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the authentication default command to configure the default authentication method for all types
of users.
Use the undo authentication default command to restore the default.
By default, the authentication method is local .
Note that:
z
The RADIUS or HWTACACS scheme specified for the current ISP domain must have been
configured.
z
The authentication method specified with the authentication default command is for all types of
users and has a priority lower than that for a specific access mode.
Related commands: authorization default , accounting default , hwtacacs scheme , radius
scheme .
Examples
# Configure the default ISP domain system to use local authentication for all types of users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication default local
# Configure the default ISP domain system to use RADIUS authentication scheme rd for all types of
users and use local authentication as the backup.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication default radius-scheme rd local
authentication lan-access
Syntax
authentication lan-access { local | none | radius-scheme radius-scheme-name [ local ] }
undo authentication lan-access