HP E4510-48G, Command Reference Manual

Page: 618 / 1334

1-3
By default, the default accounting method that the accounting default command prescribes is used
for command line users.
Note that:
z
The HWTACACS scheme specified for the current ISP domain must have been configured.
z
Currently, only HWTACACS schemes support command line accounting.
Related commands: accounting default , hwtacacs scheme .
Examples
# Configure the ISP domain test to use HWTACACS scheme hw for accounting of command line
users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting command hwtacacs-scheme hw
accounting default
Syntax
accounting default { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none |
radius-scheme radius-scheme-name [ local ] }
undo accounting default
View
ISP domain view
Default Level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name : Specifies an HWTACACS scheme by its name, which is
a string of 1 to 32 characters.
local : Performs local accounting.
none : Does not perform any accounting.
radius-scheme radius-scheme-name : Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the accounting default command to configure the default accounting method for all types of
users.
Use the undo accounting default command to restore the default.
By default, the accounting method is local .
Note that:
z
The RADIUS or HWTACACS scheme specified for the current ISP domain must have been
configured.
z
The accounting method configured with the accounting default command is for all types of users
and has a priority lower than that for a specific access mode.