HP E4510-48G, Command Reference Manual

Page: 565 / 1334

1-2
if-match
Syntax
if-match match-criteria
undo if-match match-criteria
View
Class view
Default Level
2: System Level
Parameters
match-criteria : Matching rule to be defined. Table 1-2 describes the available forms of this argument.
Table 1-2 The forms of the match-criteria argument
Field Description
acl access-list-number
Specifies an ACL to match packets. The access-list-number
argument is a number in the range 2000 to 4999 or an ACL name.
In a class configured with the operator and , the logical relationship
between rules defined in the referenced IPv4 ACL is or .
acl ipv6 access-list-number
Specifies an IPv6 ACL to match IPv6 packets. The
access-list-number argument is a number in the range 2000 to 3999
or an ACL name.
In a class configured with the operator and , the logical relationship
between rules defined in the referenced IPv6 ACL is or .
any Specifies to match all packets.
customer-dot1p 8021p-list
Specifies to match packets by 802.1p precedence of the customer
network. The
8021p-list argument is a list of CoS values, in the range
of 0 to 7.
Even though you can provide up to eight space-separated CoS
values for this argument, the Switch 4510G series switches support
only one CoS value in a rule. If you configure multiple CoS values in
a rule, the rule cannot be issued.
customer-vlan-id
vlan-id-list
Specifies to match the packets of specified VLANs of user networks.
The
vlan-id-list argument specifies a list of VLAN IDs, in the form of
vlan-id to vlan-id or multiple discontinuous VLAN IDs (separated by
space). You can specify up to eight VLAN IDs for this argument at a
time. VLAN ID is in the range 1 to 4094.
In a class configured with the operator and , the logical relationship
between the customer VLAN IDs specified for the customer-vlan-id
keyword is or .