3-26
source-deny (MLD-Snooping view)
Syntax
source-deny
port
interface-list
undo source-deny
port
interface-list
View
MLD-Snooping view
Default Level
2: System level
Parameters
interface-list
: Port list. You can specify multiple ports or port ranges by providing the this argument in
the form of
interface-list
= {
interface-type interface-number
[
to
interface-type interface-number
] },
where
interface-type
is port type and
interface-number
is port number.
Description
Use the
source-deny
command to enable IPv6 multicast source port filtering, namely to filter out all
the received IPv6 multicast packets.
Use the
undo source-deny
command to disable IPv6 multicast source port filtering.
By default, IPv6 multicast source port filtering is disabled.
This command works on MLD Snooping–enabled VLANs.
Examples
# Enable source port filtering for IPv6 multicast data on interfaces GigabitEthernet1/0/1 through
GigabitEthernet1/0/4.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] source-deny port gigabitethernet1/0/1 to gigabitethernet1/0/4
Summary of Contents for E4510-48G
