HP E4510-48G, Command Reference Manual

Page: 259 / 1334

1-4
<Sysname> display ip interface brief vlan-interface
*down: administratively down
(s): spoofing
Interface Physical Protocol IP Address Description
Vlan-interface1 up up 6.6.6.6 Vlan-inte...
Vlan-interface2 up up 7.7.7.7 Vlan-inte...
Table 1-2 display ip interface brief command output description
Field Description
*down: administratively
down
The interface is administratively shut down with the shutdown command.
(s) : spoofing
Spoofing attribute of the interface. It indicates that an interface whose
network layer protocol is displayed up may have no link present or the link
is set up only on demand.
Interface Interface name
Physical
Physical state of the interface, which can be
z
*down: Indicates that the interface is administratively down; that is, the
interface is shut down with the
shutdown command.
z
down: Indicates that the interface is administratively up but its physical
state is down, which may be caused by a connection or link failure.
z
up: Indicates that both the administrative and physical states of the
interface are up.
Protocol
Link layer protocol state of the interface, which can be
z
down: Indicates that the protocol state of the interface is down, which
is usually because that no IP address is assigned to the interface.
z
up: Indicates that the protocol state of the interface is up.
IP Address
IP address of the interface (If no IP address is configured, “unassigned” is
displayed.)
Description
Interface description information, for which at most 12 characters can be
displayed. If there are more that 12 characters, only the first nine
characters are displayed.
ip address
Syntax
ip address ip-address { mask | mask-length } [ sub ]
undo ip address [ ip-address { mask | mask-length } [ sub ] ]
View
Interface view
Default Level
2: System level
Parameters
ip-address : IP address of interface, in dotted decimal notation.
mask : Subnet mask in dotted decimal notation.