20-7
Parameters
interface interface-list
: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list
argument is in the format of
interface-list
= {
interface-type
interface-number
[
to
interface-type
interface-number
] } & <1-10>, where
interface-type
represents the port type,
interface-number
represents the port number, and & <1-10> means that you can provide up to 10 port
indexes/port index lists for this argument.
Description
Use the
reset ndp statistics
command to clear NDP statistics.
If no
interface interface-list
is specified, NDP statistics of all ports are cleared; otherwise, NDP
statistics of a specified port are cleared.
Examples
# Clear NDP statistics of all ports.
<Sysname> reset ndp statistics
NTDP Configuration Commands
display ntdp
Syntax
display ntdp
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display ntdp
command to display NTDP configuration information.
Examples
# Display the global NTDP information.
<Sysname> display ntdp
NTDP is running.
Hops : 4
Timer : 1 min(disable)
Hop Delay : 100 ms
Port Delay: 10 ms
Last collection total time: 92ms
Summary of Contents for E4510-48G
