HP E4510-48G, Command Reference Manual

Page: 1252 / 1334

19-3
display ntp-service status
Syntax
display ntp-service status
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ntp-service status command to view the NTP service status information.
Examples
# View the NTP service status information.
<Sysname> display ntp-service status
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^18
Clock offset: 0.0000 ms
Root delay: 0.00 ms
Root dispersion: 0.00 ms
Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
Table 19-2 display ntp-service status command output description
Field Description
Clock status
Status of the system clock, including
z
Synchronized: The system clock has been synchronized.
z
Unsynchronized: The system clock has not been synchronized.
Clock stratum Stratum level of the system clock
Reference clock ID
After the system clock is synchronized to a remote time server, this
field indicates the address of the remote time server; after the
system clock is synchronized to a local reference source, this field
indicates the address of the local clock source:
z
When the local clock has a stratum level of 1, the value of this
field is “LOCL”;
z
When the stratum of the local clock has another value, the value
of this filed is the IP address of the local clock.
Nominal frequency The nominal frequency of the local system hardware clock, in Hz