HP E4510-48G, Command Reference Manual

Page: 1224 / 1334

18-16
filename
Syntax
filename filename
undo filename
View
FTP test type view
Default Level
2: System level
Parameters
filename : Name of the file transferred between the FTP server and the FTP client, a string of 1 to 200
characters. It is case sensitive.
Description
Use the filename command to specify a file to be transferred between the FTP server and the FTP
client.
Use the undo filename command to restore the default.
By default, no file is specified.
Examples
# Specify the file to be transferred between the FTP server and the FTP client as config.txt.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] filename config.txt
frequency
Syntax
frequency interval
undo frequency
View
Any NQA test type view
Default Level
2: System level
Parameters
interval : Interval between two consecutive tests, in milliseconds, in the range 0 to 604800000. If the
interval is 0, it indicates that only one test is performed, and no statistics are generated.