HP E4510-48G, Command Reference Manual

Page: 1124 / 1334

10-17
Examples
# Configure the local engine ID as 123456789A .
<Sysname> system-view
[Sysname] snmp-agent local-engineid 123456789A
snmp-agent log
Syntax
snmp-agent log { all | get-operation | set-operation }
undo snmp-agent log { all | get-operation | set-operation }
View
System view
Default Level
3: Manage level
Parameters
all : Enables logging of SNMP GET and SET operations.
get-operation : Enables logging of SNMP GET operation.
set-operation : Enables logging of SNMP SET operation.
Description
Use the snmp-agent log command to enable SNMP logging.
Use the undo snmp-agent log command to restore the default.
By default, SNMP logging is disabled.
If specified SNMP logging is enabled, when the NMS performs a specified operation to the SNMP
agent, the latter records the operation-related information and saves it to the information center. With
parameters for the information center set, output rules of the SNMP logs are decided (that is, whether
logs are permitted to output and the output destinations).
Examples
# Enable logging of SNMP GET operation.
<Sysname> system-view
[Sysname] snmp-agent log get-operation
# Enable logging of SNMP SET operation.
<Sysname> system-view
[Sysname] snmp-agent log set-operation
snmp-agent mib-view
Syntax
snmp-agent mib-view { excluded | included } view-name oid-tree [ mask mask-value ]
undo snmp-agent mib-view view-name