QuickSpecs
HP EliteDisplay E242 24-inch Monitor
HP EliteDisplay E242 24-inch Monitor Head Only
Technical Specifications
c04820064 — DA – 15432 — Worldwide — Version 3 — May 9, 2016
Page 10
© Copyright 2016 Hewlett-Packard Development Company, L.P.
ENERGY STAR is a registered mark owned by the U.S. government. All specifications represent the typical specifications provided
by HP's component manufacturers; actual performance may vary either higher or lower. The only warranties for HP products and
services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained
herein.
1.
External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be
Low Halogen.
2.
EPEAT® Gold where HP registers commercial display products. See www.epeat.net for registration status in your country.
3.
Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from date
of hardware purchase. Restrictions and limitations apply. See
http://www.hp.com/go/cpc
for details.
4.
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting
surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the
VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to
determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting
solution is properly installed to support applied loads.
