HP E1418A, Service Manual

Page: 14 / 96

Recommended
Test Equipment
Table 1-1 lists the test equipment recommended for testing and servicing
the module. Essential requirements for each piece of test equipment are
described in the Requirements column.
Table 1-1. Recommended Test Equipment
Instrument Requirements Recommended
Model
Use*
Controller, HP-IB HP-IB compatibility as defined by
IEEE Standard 488-1988 and the
identical ANSI Standard MC1.1:
SH1, AH1, T2, TE0, L2, LE0, SR0,
RL0, PP0, DC0, DT0, and C1, 2, 3, 4, 5. HP 9000 Series 300 F,O,P,T
Mainframe Compatible with the HP E1418A E1400B/T,
E1401A/T, or
E1401B F,O,P,T
Command
Module, VXILink,
EPC7 Embedded
Controller Compatible with Module
Resource manager in Slot 0
Logical address 0
Typical HP-IB address 9
Requires the downloaded driver
“E1418” E1405B or E1406A/B F,O,P,T
Digital Multimeter
5 1/2 or 6 1/2 digit Voltage measurements to
±
16.8 Vdc
Current measurements to
±
0.02 A
Four-wire resistance measurements
from 50
Ω
to 500
Ω
HP 3458A or
HP 34401A O, P, T
Terminal Module Compatible with the HP E1418A HP E1418-60101 O, P,T
Resistor 10 k
Ω
, 1%, 0.25 W, metal film Any available
supplier meeting the
requirements P
Resistor 600
Ω
, 1%, 0.25 W, metal film P
User’s Manual E1418-90001 F,O,P,T
*
F = Functional Verification Tests, O = Operation Verification Tests, P = Performance Verification Tests, T = Troubleshooting
14 General Information Chapter 1