HP Dragonfly Folio Maintenance And Service Manual Download

Page: 93 / 109

Connected USB flash drive

NOTE:

To download the HP PC Hardware Diagnostics UEFI tool to a USB flash drive, see

Downloading the latest HP PC Hardware Diagnostics UEFI version on page 87

Hard drive

BIOS

When the diagnostic tool opens, select the type of diagnostic test that you want to run, and then follow

the on-screen instructions.

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive can be useful in some situations.

●

HP PC Hardware Diagnostics UEFI is not included in the preinstallation image.

●

HP PC Hardware Diagnostics UEFI is not included in the HP Tool partition.

●

The hard drive is damaged.

NOTE:

The HP PC Hardware Diagnostics UEFI downloading instructions are provided in English only, and

you must use a Windows computer to download and create the HP UEFI support environment because

only .exe files are provided.

Downloading the latest HP PC Hardware Diagnostics UEFI version

To download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive, follow this procedure:

Go to

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

Select Download HP Diagnostics UEFI, and then select Run.

Downloading HP PC Hardware Diagnostics UEFI by product name or number (select products only)

You can download HP PC Hardware Diagnostics UEFI by product name or number (select products only) to a

USB flash drive.

NOTE:

For some products, you might have to download the software to a USB flash drive by using the

product name or number.

Go to

http://www.hp.com/support

Enter the product name or number, select your computer, and then select your operating system.

In the Diagnostics section, follow the on-screen instructions to select and download the specific UEFI

Diagnostics version for your computer.

Using Remote HP PC Hardware Diagnostics UEFI settings (select

products only)

Remote HP PC Hardware Diagnostics UEFI is a firmware (BIOS) feature that downloads HP PC Hardware

Diagnostics UEFI to your computer. It can then execute the diagnostics on your computer, and it might upload

results to a preconfigured server.

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands