Integration Note
Help us improve our technical communication. Let us know what you think
about the technical information in this document. Your feedback is valuable
May 2002
16S6-0502A-WWEN
Prepared by ISS Technology
Communications
Compaq Computer Corporation
Contents
Introduction to the
Architecture .................................3
Requirements...............................3
Default Hardware
Configurations ............................4
Supported Software ...................4
Device Support for Red Hat
Linux 7.2 for Itanium
Processor...................................5
Supported Storage Options........5
Supported Network Interface
Controllers..................................5
Installation Procedures ...............6
Appendix A–Compaq Web
Resources ....................................9
Appendix B–Red Hat Web
Resources ....................................9
Deployment of Red Hat Linux
7.2 for Itanium™ Processor on
ProLiant DL590/64 Servers
Abstract:
In support of the Itanium processor family, Red Hat
released the Red Hat Linux 7.2 for Itanium Processor operating
system for Itanium-based servers in December 2001. This document
describes the level of support available for the Red Hat Linux 7.2 for
Itanium Processor operating system on the ProLiant DL590/64
server
including:
•
•
•
•
Recommended system configurations
Supported software, storage options, and network adapters
Recommended installation procedures
This document is intended to augment the documentation provided
with the ProLiant DL590/64 server and the documentation provided
with Red Hat Linux 7.2 for Itanium Processor. It is offered with the
intent of enhancing the user’s experience of Red Hat Linux 7.2 for
Itanium Processor on the Itanium-based platform.
For the latest information, visit the following websites:
ProLiant DL590/64 Product Marketing Site:
www.compaq.com/products/servers/proliantdl590
•
ProLiant Linux Site:
www.compaq.com/linux1
and will help us structure future communications. Please send your
comments to:
