HP DL320s - ProLiant 9TB SATA Storage Server NAS User Manual Download Page 18

Page: 18 / 150

•

ProLiant Essentials Integrated Lights-Out 2 Advanced Pack

Powering on the server

Power on the server after connecting the cables. For more information on your storage server model's

hardware components, see "

Server components

" on page 123.

Power on server by pushing the power button. The power LED illuminates green.

When the server powers on, an installation progress screen is displayed. The installation process

takes approximately 10 to 15 minutes to complete and the server will reboot twice. No user

interaction is required.

CAUTION:

Do not interrupt the installation process; when the installation sequence is complete, the

system prompt appears.

Go to "

Accessing the HP Storage Server Management console

" on page 19 to set up server access.

Factory image

HP ProLiant Storage Servers are precon

gured with default storage settings and preinstalled with either the

Windows Storage Server 2003 R2 operating system or the Microsoft® Windows® Uni

ed Data Storage

Server 2003 operating system. This section provides additional details about the precon

gured storage.

Physical con

guration

The logical disks reside on physical drivess as shown in "

HP ProLiant hardware RAID

con

gurations

" on page 18. The DON'T ERASE volume contains an image that is deployed onto the

OS partition during system installation.

Table 4 HP ProLiant hardware RAID con

gurations

Logical Disk 1

Logical Disk 2

Logical Disk 3

ML310

•

Operating System Volume

•

RAID 5

•

Physical Drives 0–3

•

DON'T ERASE Volume

•

RAID 5

•

Physical Drives 0–3

•

Data Volume

•

RAID 5

•

Physical Drives 0–3

DL585

•

Operating System Volume

•

RAID 5

•

Physical Drives 0–1

•

DON'T ERASE Volume

•

RAID 5

•

Physical Drives 0–1

N/A

NOTE:

In the HP Array Con

guration Utility (ACU), logical disks are labeled 1 and 2. In Microsoft Disk

Manager, logical disks are displayed as 0 and 1. For HP Smart Array con

guration information, see

http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/

The DON’T ERASE logical disk supports the recovery process only and does not host a secondary

operating system. If the operating system has a failure that might result from corrupt system

les, a corrupt

registry, or the system hangs during boot, see "

System recovery

" on page 121.

If the data volume is not carved at the factory or during the installation process, it must be con

gured

manually by the end user. Be sure to back up your user data, and then use the System Recovery DVD to

restore the server to the factory default state as soon as conveniently possible.

Installing and con

guring the server

Summary of Contents for DL320s - ProLiant 9TB SATA Storage Server NAS























































































































































Search results

Summary of Contents for DL320s - ProLiant 9TB SATA Storage Server NAS

Reviews:

HP DL320s - ProLiant 9TB SATA Storage Server NAS, User Manual, Page: 18 / 150

Search results

Summary of Contents for DL320s - ProLiant 9TB SATA Storage Server NAS

Reviews: