14
Set
Schedule
You can schedule the DPF to automatically go into a “stand-by” mode and resume operation according to your weekly
schedule. For example, if you have your DPF on your desk at work, you may want to display the calendar/clock or
play a slideshow from 8:30am to 5:30pm every weekday, and then set the DPF to remain in stand-by mode
throughout the weekend. The following Monday morning, the DPF would resume operation at 8:30am.
1. On
the
CALENDAR/CLOCK
screen, press
.
2. Select
Set
Schedule
.
3. Use
to move between the fields and
to change the field values in
Weekdays
On/Off
.
4. To set the
Weekends On/Off
, select the
Enable
Weekends
Schedule
button, and then use
to access the
settings.
5. Use
to move between the fields and
to change the field values in
Weekends
On/Off
.
6. When correct times are set, select
Done
to return to the previous screen.
Disable
Schedule
After the schedule has been enabled
(per above instructions)
, you can disable the schedule whenever desired.
1. On
the
CALENDAR/CLOCK
screen, press
.
2. Select
Set
Schedule
, and then select the
Enable
Weekdays
Schedule
or
Enable
Weekends
Schedule
button.
The time fields will display
OFF
.
3. Select
Done
.
Run
the
Schedule
After the schedule times have been set
(per above instructions)
, you will use the
Run
Schedule
function whenever
you want the schedule to take effect.
There are two methods for running the schedule, either from a slideshow or from the
CALENDAR/CLOCK
screen.
CAUTION
: After you select the
Run
Schedule
function, any user intervention will cancel the activation
(i.e.,
pressing
remote or control button, powering off)
and the schedule will not take effect until you select
this function again to re-activate.
Run
Schedule
from
Slideshow
1. Start a slideshow, and then press
when the
Run
Schedule
button appears
(approx 10 seconds)
. A
small timer clock will appear indicating the schedule is active. To run the schedule when the
Run
Schedule
button is no longer displayed, restart your slideshow and then press
when the
Run
Schedule
button
appears again.
2. The DPF will go into stand-by mode according to the schedule, and when it resumes operation, the
slideshow will again begin
to play.
Run
Schedule
from
CALENDAR/CLOCK
Screen
1. On
the
CALENDAR/CLOCK
screen, press
.
2. Select
Run
Schedule
. A small timer clock will appear indicating the schedule is active, and then the DPF will
operate according to the set schedule.
3. The DPF will go into stand-by mode according to the schedule, and when it resumes operation, the
Calendar/Clock
screen will again be displayed.