8 Important Safety Precautions
Always follow these basic safety precautions when using our Digital Photo Frame (DPF). This will reduce
the risk of fire, electric shock, and injury.
WARNING:
To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
Do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to qualified
personnel.
•
The DPF is for indoor use only.
•
Unplug the DPF before performing care and maintenance.
•
Do not block the ventilation holes on the back of the DPF at any time.
• Keep your DPF out of direct sunlight and heat sources.
•
Route the power cable so that it is not likely to be walked on or pinched by items placed on or against it.
Pay particular attention to the point where the cable attaches to the DPF.
•
Only use the AC adapter included with the DPF. Using any other power adapter will void warranty.
•
Unplug the power cord from the power outlet when the unit is not in use.
Cleaning the DPF
Treat the screen gently.
To clean fingerprints or dust from the LCD screen we recommend using a soft, non-abrasive cloth such as
a camera lens cloth.
If you use a commercial LCD cleaning kit, do not apply the cleaning fluid directly to the LCD screen. Clean
the LCD screen with the cleaning solution applied to the cleaning cloth.
Clean the outer surface of the DPF with a soft cloth dampened with water.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
-11-
