Compaq Professional Workstation AP550 Hardware Reference Guide
2-11
Compaq Confidential - Need to Know Required
Writer:
Beth Zanca
Part Number:
191010-001
File Name:
e-ch02.doc
Last Saved On:
04/18/00 2:28 PM
Last Saved By:
Lydia Sanchez
Preparing for Drive Installation
Removing the Bezel Blank
Remove the drive bezel before installing any removable media storage
device, such as a tape drive, CD-ROM or DVD-ROM drive, or diskette
drive in these bay locations.
To remove the bezel blank:
1.
Turn off the workstation and any external devices.
2.
Disconnect the power cord from the grounded AC outlet and the
back of the workstation.
3.
Remove the workstation access panel. Refer to Removing the
Workstation Access Panel in this chapter.
4.
Remove the front bezel. Refer to Removing the Front Bezel in
this chapter.
5.
Gently pull the subpanel, with the bezel blank secured, away from
the front bezel.
CAUTION:
Hold the subpanel straight when you pull it away from the
front bezel. Pulling the subpanel away at an angle could damage the
pins that align it within the front bezel.