Scanning thick media
hp designjet copier cc800ps
17
h -
Check the box labeled Adjust for extended media
thickness.
i -
Change the value for each of the scanner’s cameras.
Normally, only positive values should be used.
j -
Make test scans and readjust the values until you are
satisfied that the lines are stitched correctly.
k -
Click OK to accept your settings.
l -
Repeat steps (d) to (h) until you are satisfied with the
results.
To return the insertion slot height to its
Normal
position:
a -
Press down on the platen as you push first one slider
and then the other (left and right) towards the sides of
the copier.
b -
When the platen is returned to its
Normal
position, the
message
Paper Guide in Extended Position
will be
replaced by the Load option
: Center
or
Side.
quickref.fm Page 17 Monday, February 25, 2002 4:09 PM
