HP DesignJet 2000CP, Service Manual, Page: 68 / 332

3-2 User Messages
HP DesignJet CP Series Printers
User Messages for HP DesignJets 2500CP and 2000CP with
Firmware Version A.02.14 or Higher and HP DesignJets
3500CP and 3000CP
NOTE FOR HP DESIGNJETS 2500CP AND 2000CP: IF YOU HAVE
ANYUSER MESSAGES WHICH ARE NOT LISTED IN THIS
CHAPTER, THEN CHECK WHICH FIRMWARE VERSION IS
INSTALLED IN THE PRINTER, AND IF NECESSARYUPGRADE TO
FIRMWARE VERSION A.02.14 OR HIGHER.
Message Explanations and Actions
Message Explanation and Action
Accessing head
cleaners The printer is moving the platform that contains the printhead cleaners to a place
where you can access them.
Wait for a few seconds until this operation has finished.
Accessing
printheads The printer is moving the carriage that contains the printheads to a place where
you can access them.
Wait for a few seconds until this operation has finished.
Action unavailable
Entry being printed A print is being printed and you have requested to move, delete or modify the
number of copies through the queue management menu. You cannot change the
current entry until the print has finished.
Wait until the print has finished.
Calibrate error
Continue The calibration print was loaded incorrectly and it could not be measured.
Press
↓
to continue, then reload the print for measurement. Follow front panel
instructions.
Calibrate Yes
Color
Νο
You are using sheet media and color calibration is on. The printer is asking you if
you want to calibrate the color for the loaded media.
Press
↑
for yes
.
Press
↓
for no
.