Enabling and disabling system configuration options
NOTE:
Some of the items listed below may not be supported by your computer.
To enable or disable devices or security options:
1.
Select
Start > All Programs > HP ProtectTools Security Manager
.
2.
In the left pane, click
BIOS Configuration
.
3.
Type your Computer Setup administrator password at the BIOS administrator password prompt,
and then click
OK
.
4.
In the left pane, click
System Configuration
, and then enable or disable a system configuration
option, or configure any of the following system configuration options in the right pane:
●
Port Options
◦
Serial Port
◦
Infrared Port
◦
Parallel Port
◦
SD Slot
◦
USB Port
◦
1394 Port
◦
Cardbus Slot
◦
ExpressCard slot
●
Boot Options
◦
F9, F10, and F12 Delay (Sec)
◦
MultiBoot
◦
Express Boot Popup Delay (Sec)
◦
CD-ROM Boot
◦
Floppy Boot
◦
Internal Network Adapter Boot
◦
Internal Network Adapter Boot Mode (PXE or RPL)
◦
Boot Order
●
Device Configurations
◦
NumLock at Boot
◦
Swapping fn/Ctrl Keys
◦
Multiple Pointing Devices
◦
USB Legacy Support
◦
Parallel port mode (standard, bidirectional, EPP, or ECP)
◦
Data Execution Prevention
44
Chapter 5 BIOS Configuration for HP ProtectTools
ENWW
