HP Compaq Presario V2000 Maintenance And Service Manual Download Page 11

Page: 11 / 176

Product Description

Maintenance and Service Guide

1–7

Table 1-1

Front Components

Item

Component

Function

Speakers (2)

Produce stereo sound.

Wireless light (select
models only)

On: An integrated wireless device is
hardware enabled.

Power/standby light

■

On: Notebook is turned on.

■

Blinking: Notebook is in standby.

■

Off: Notebook is off or in hibernation.

IDE (Integrated Drive
Electronics) drive light

■

On or blinking: The internal hard drive
or an optical drive is being accessed.

Battery light

■

Amber: The battery pack is charging.

■

Green: The battery pack is fully
charged.

■

Off: The battery pack is discharging
or not inserted.

Display release latch

Opens the notebook.

Audio-in
(microphone) jack

Connects an optional monaural (single
sound channel) microphone.

Audio-out
(headphone) jack

Connect optional headphones or powered
stereo speakers. Also connect the audio
function of an audio/video device such as
a television or VCR.

Summary of Contents for Compaq Presario V2000

















































































































































































Search results

Summary of Contents for Compaq Presario V2000

Reviews:

Related manuals for Compaq Presario V2000

Brands by name

Popular brands

HP Compaq Presario V2000, Maintenance And Service Manual

Search results

Summary of Contents for Compaq Presario V2000

Reviews:

Related manuals for Compaq Presario V2000

Brands by name

Popular brands